Assembling a gas barbecue

Assembling a gas barbecue

Assembly

How to assemble your Morsø gas cooker grill
  1. Open the lid on your Forno Gas grill
  2. Tighten the handle with a screw on each side. Don’t forget the rubber rings and washers
  3. Close the grill and put on a thermometer. Hold the thermometer and open the grill again
  4. Tighten the nut to the thermometer inside the grill
  5. Three-piece cast-iron grill to be placed in the grill
  6. Cover the drip tray at the back of the grill
How to attach a gas cylinder to your Morsø gas grill
  1. Soak the tube in hot water to make it easier to attach
  2. Put the strap on the tube and secure the tube at the back of the grill. The tube must be completely on the nozzle
  3. Lift the strap and tighten it on the nozzle
  4. Repeat this procedure to attach the tube to the gas regulator
  5. Lift the black ring on the gas regulator. Press it onto the gas valve in the cylinder. Spragt – for correct installation
  6. Remember to switch on the gas before use
How to attach your Morsø Forno Gas Medio (Type 1) to a Morsø Tavolo table
  1. Place the table on its side – use a screwdriver to loosen the screw holes
  2. Place the grill on the table and make sure that the holes in the table are aligned with the holes in the grill screws
  3. Insert both screws from the bottom and tighten
How to attach your Morsø Forno Gas Piccolo, Medio (Type 2) or Grande to a Morsø Tavolo table
  1. Attach the two plastic cones to the table
  2. Place the grill on the table and make sure that the cones fit into the holes in the cones
  3. Insert the safety screw from the bottom and tighten